Sensor Data Transmission; Clock; Clock Reception - Oregon Scientific RMS300 Manual De Usuario

NOTE
Use alkaline batteries for longer usage and consumer
grade lithium batteries in temperatures below freezing.

SENSOR DATA TRANSMISSION

To search for a sensor:
Press and hold + MODE.
The remote sensor reception icon will show the following
status:
ICON
Main unit is searching for sensor(s).
A channel has been found.
The sensor cannot be found.
TIP
The transmission range may vary depending on many
factors. You may need to experiment with various locations
to get the best results.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock
automatically with a clock signal.
DESCRIPTION
RMS300:
Slide EU / UK to select the signal received.
EU: DCF-77 signal: within 1500 km (932 miles) of
•
Frankfurt, Germany.
UK: MSF-60 signal: within 1500 km (932 miles) of
•
Anthorn, England.
RMS300A:
WWVB-60 signal: within 3200 km (2000 miles) of Fort
Collins, Colorado.
To enable / disable clock signal reception:
Press and hold
signal reception.
NOTE
Reception takes 2-10 minutes. If the signal is weak,
it can take up to 24 hours to get a valid signal. If signal
reception is unsuccessful, place your unit next to a window,
press and hold to force another signal search.
Clock signal reception indicator:
STRONG
WEAK SIGNAL
SIGNAL
4
to enable or to disable clock
NO SIGNAL