Puma Go Manual De Usuario página 19

Chrono Mode:
Press S3 shortly from Time mode to chrono mode. Default is
00'00"00. The resolution is 1/100 second for the first hour and
1 second for the rest. Working range for chrono is 99 hours 59
minutes 59.99 seconds and stop automatically.
The watch is also capable of storing 10 laps memory. This includes
the first 9 laps and the last lap.
Button S1 is used for "Start/Lap" operation and button S2 for "stop/
reset" operation.
Lap will be displayed for 4-5 seconds when "Lap" and "Split" is
taken, and then the split time is displayed for also 4-5 seconds.
Press Button S4 for fast escape.
If lap counter is larger than 9, it will not be displayed. The watch
will display "LAP -" and "SPL -". Data will not be stored in memory
except the last lap. All Data stored in memory will be cleared when
the chronograph is reset.
Stoppuhr
2-3 Sek.
Rücksetzen Start RUNDE
Start
S1 S1
S2 S1 S2
Stopp
S2
Speicher löschen und rücksetzen
36
S1 S1
zwischenzeit Läuft
4 Sek. 4 Sek.
oder S4 oder S4
drücken drücken
S1
Stopp S2 Stopp S2 S1
Stopp
S2
Data mode:
Press S3 shortly from chrono mode to Data mode. The watch will
display LAP1 after 2-3 seconds if there is data available. If there is
no data, it will display "- - - -".
Press button S1 to scan the data in sequence from Lap1 to Lap 9
and the last lap.
Press S4 to toggle the display for Lap or Split Time. If there is no key
operation, the lap and split time is displayed in 4 seconds interval
automatically. Press S2 to change back to chrono mode.
Datenbank
Keine
Daten
2-3 Sek.
RUNDE
RUNDE zwischenzeit
Daten 4 Sek.
vorhanden oder S4
2-3 Sek. drücken
4 Sek.
oder S4
drücken
S1
RUNDE zwischenzeit
4 Sek.
oder S4
drücken
4 Sek.
oder S4
S1 drücken
RUNDE zwischenzeit
4 Sek.
oder S4
S1
drücken
4 Sek.
oder S4
drücken
S2
37