Descargar Imprimir esta página

General Information; Manual Purpose; Terminology And Symbol Legend; Product Identification - Comet Spa CPS 50 Manual De Instrucciones

Publicidad

2. GENERAL INFORMATION

2.1

MANUAL PURPOSE

To make it easier to read about and look up various
subjects, refer to the table of contents at the be-
ginning of the section in your language.
This manual has been prepared by the manufactu-
rer and is an integral part of the product. As such,
it must be kept in a safe place for the machine's
entire service life until demolition.
The customer must ensure that machine operators
have read or are familiar with the contents of this
manual so that they strictly follow the instructions
described herein.
Constant compliance with the instructions provi-
ded in this manual is the only way to guarantee
the best results in terms of safety, performance,
efficiency and service life of the product you now
own. Non-compliance with these rules may cause
injuries to people and damage to the machine, the
scrubbed surface and the environment: in no case
can such injuries or damage be attributed to the
manufacturer.
This manual refers in detail to the machine and
provides instructions and descriptions only about
our batteries and battery chargers (optional).
The batteries and the battery charger are basic
complementary machine parts and will affect its
operation in terms of running time and perfor-
mances. Only the correct combination of the two
accessories (batteries and battery charger) will en-
sure the highest possible performances and avoid
wasting lots of money. For more detailed informa-
tion refer to the special battery and battery charger
manuals.
Our recommended battery chargers and batteries
(optional) ensure the best combination with the
machine and offer outstanding versatility (battery
charger) as well as the category's highest quality
and performance standards.
2.2
TERMINOLOGY AND SYMBOL LE-
GEND
For the sake of clarity and to efficiently highlight
the various aspects of the instructions provided,
terms and symbols were used that are defined and
illustrated here below:
- Machine. This definition replaces the commercial
name to which this manual refers.
- Operator. 'operator' means the person or persons
given the task of installing, operating, adjusting,
maintaining, cleaning, repairing or transporting ma-
chinery.
- Technician. A technician is considered a person
who has the experience, technical education, legis-
lative and regulatory knowledge that allows him to
carry out any type of required work, and the ability to
recognise and to avoid possible risks during machine
installation, and maintenance.
☞ - INDICATION SYMBOL. Particularly impor-
tant information to avoid machine malfunctions.
• - ATTENTION SYMBOL. Very important infor-
mation to avoid serious damage to the machine
and to the environment in which it operates.
• - DANGER SYMBOL. Vital information to avoid
serious (or extreme) consequences affecting the
health of persons and causing damage to the pro-
duct and the environment in which it operates.
Total weight (ready to operate)
Max. working range incline 2%
(Max. transporting range incline 10%)
Rated power brush drive
Rated power suction turbine
2.3

PRODUCT IDENTIFICATION

The nameplate located under the dashboard con-
tains the information:
2.4

SPECIFIC USE

This appliance is suited for the commercial use, e.g.
in hotels, schools, hospitals, factories, shops, offices,
and rental companies.
This machine is a floor scrubber-drier: it must be
used to scrub and to vacuum liquids of flat, rigid,
horizontal, smooth or moderately rough and uni-
form floors that are free from obstacles in both
civic and industrial environments. Any other use
is prohibited.
Please refer very carefully to the safety information
reported in this manual.
The scrubber-drier distributes a quantity of a
water and detergent solution (adjustable) on the
surface to be cleaned, while the brushes remove
any dirt on the ground. The machine's suction sy-
stem, using a ground squeegee, perfectly dries the
liquids and the dirt just removed from the front
brushes in a single pass.
By efficiently combining a cleaning detergent with
various types of brushes (or abrasive disks), the
machine can adapt to all the various combinations
of floors and dirt.
2.5

TECHNICAL MODIFICATIONS

The manufacturer reserves the right to make tech-
nical modifications to the product, without prior
notice, in order to make the necessary technical
upgrades or improvements. For this reason, some
details of your machine may be different from the
information in the sales catalogues or from the il-
lustrations presented in this booklet. However, this
will not reduce safety or invalidate the information
supplied to this regard.
27

Publicidad

loading