General Information - Comet Spa ETW Manual De Instrucciones

EN
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
This manual is intended for both the end user and the Skilled Technician and contains the pump
operation and maintenance instructions.
This manual is completed by another, dedicated to the Skilled Technician only and specific for
each series of pumps, which provides instructions for the correct integration of the pump in the
end machine and for special maintenance, also including exploded diagrams, overall dimensions,
technical data, detail specifications, etc..
By Skilled Technician is meant:
• the Manufacturer of the machine (e.g., high pressure cleaner, bin washer, road sweeper) in which
the pump is integrated (from now on, when reference is made to "machine in which the pump is
integrated", this may also refer to "system in which the pump is integrated", such as, for example,
in the case of a pumping station);
• a person, normally belonging to the after-sales centre, specifically trained and authorised to perform
special maintenance jobs and repairs on the pump and on the machine in which this is integrated. It
should be remembered that jobs on the electrical parts must be performed by a Skilled Technician
who is also a Professional Electrician, meaning a person professionally qualified and trained to
check, install and repair electrical apparatus in a "workmanlike" manner and in accordance with
the laws applicable in the country where the machine integrating the pump is installed.
Carefully read the pump manuals and that of the machine in which the pump is integrated: carefully
comply with the instructions contained in them.
Special care must be given to reading the parts of the text marked by the symbol:
inasmuch as these contain important safety instructions concerning pump operation.
The Manufacturer disclaims all liability relating to damage caused by:
• failure to abide by the contents of the pump manuals and the manual of the machine in which the
pump is integrated;
• the pump being used in ways other than those indicated in the
• the pump being used in ways contrary to applicable laws on safety and prevention of work accidents;
• tampering with the safety and max operating pressure limitation devices;
• incorrect assembly and installation;
• incorrect maintenance;
• changes made or jobs done on the pump without the permission of the Manufacturer;
• use of non-original spare parts or which are not suitable for the pump model;
• repairs not performed by a Skilled Technician.
WARNING
• The pump manuals complete that of the machine in which the pump is integrated: read all the manuals
carefully.
The manuals must be deemed an integral part of the pump and must be looked after for future
14

GENERAL INFORMATION

USING AND LOOKING AFTER THE MANUALS
FOREWORD
WARNING
"I " paragraph;
NTENDED USE