Matrix PG 5600-1 Traducción Del Manual Original página 69

Tank capacity:
Engine oil: Appox.1.1 l (15W40/<0
Weight:
Guaranteed sound power level L
Power factor cos φ:
Power class:
Max. temperature:
Max. altitude (above mean sea level):
Spark plug:
Operating mode S1 (continuous operation)
The machine can be continuously operated with
the quoted power output.
Operating mode S2 (temporary operation)
The machine may be temporarily operated
with the quoted power output. Afterwards the
machine must be stopped for a while to prevent
it from overheating
5. Layout (Fig. 1-7)
1 Tank indicator
2 Fuel cap
3 230 V~ socket-outlets
4 400 V~ socket outlets
5 12 V d.c. outlet
6 Earth connection
7 Overload cut-out
8 Voltmeter
9 Oil drain plug
10 Oil filler plug
11 Oil shortage cut-out
13 Choke lever
14 Pull cord
15 Electro starter
16 Petrol cock
17 Wheels
18 Carry handle
19 Rubber feet
20 Battery
21 Transport handles
22 Oil filler set
23Spark plug wrench set
25 l 24 Push bar assembling set
o
C: 5W30) 25 Wheel assembling set
82.5 kg 26 Spanner
: 97 dB(A) 27 DC oulet adapter cable
WA
1 28 Air filter set
G1 29 Spark plug
40 °C 30 Muffler
1000 m 31 230 V~ / 400V ~transfer switch
LD F7RTC 32 Electro starter key
6. Before putting the machine into
operation
6.1 Wheel assembly (fig 3-5)
1. First place one end of the bolt (item 25)
through the hole in the frame and secure it with a
nut and washer.
2. Put the socket through the another end of bolt
(item 25) and place the wheel, washer and secure
it with the nut.
3. Place the wheel cover and secure it via clip as
designed on the inner side of cover.
4. Assemble the left side wheel with same
prodcedure as above.
Important:
The inner wheel should be inflated for it has been
shipped out with lower pressure (max. gauge
pressure 3
bar/0.3 MPa).
6.2 Rubber feet assembly (fig. 6)
Hold the foot (item 19) against the frame as
shown. First place the bolt through the hole in
the frame and the hole in the foot and secure it
with a nut. Then secure other three bolts and nuts
with same procedure.
6.3 Transport handle assembly (fig. 7-8)
Place the carry handle (item 18) through the
bracket
69