Regular Checks - TEUFELBERGER pulleySAVER Manual Del Usuario

REGULAR CHECKS

Note: For inspection parameters also consult the specific user instructions for all hardware
that is part of the pulleySAVER.
Checking the equipment at regular intervals is absolutely necessary: your safety de-
pends on the effectiveness and durability of the equipment!
Following each use, the product should be checked for abrasion and cuts. Also check it for the
legibility of the product labelling! The use of damaged components or components subjected
to a fall must be discontinued at once. If there is only the slightest doubt, the product needs to
be retired or subjected to testing and by a competent person.
When using the equipment in occupational health and safety to EN 365, it must be checked at
least every 12 months by a duly qualified person strictly observing the instructions, or else by
the manufacturer, and it must, whenever necessary, be replaced. These inspections must be
documented (documentation of equipment; ( ..., cf. the following table). According to AS/NZS
5532:2013, such written records must be made available to the user. It is advisable to mark the
anchor divice with either the next or the latest date of inspection.
Refer to national regulations for inspection intervals.
Product inspection record sheet:
Manufacturer:
TEUFELBERGER
Fiber Rope GmbH,
Vogelweiderstraße 50,
A-4600 Wels
Batch No.:
Date of Production:
Compatible components within harness based work at height systems:
Comments:
Model: pulleySAVER
Serial No.:
Purchase Date:
REGULAR CHECKS
Retailer:
Name of User:
Date of First Use: Date of Retirement:
19