Tools Required - Mopar 82211665AD Instrucciones De Montaje

2
Call Out
1
2
3
4
5 Windshield Wiper Fluid Hose (2011 Models)
6
Windshield Wiper Fluid Hose (2009­2010 Models)
7
8
9
10
THIS ACCESSORY WILL REQUIRE THE USE OF MOPAR ® BLUE LOCK & SEAL ADHESIVE OR EQUIVALENT TO
INSTALL WHICH IS NOT INCLUDED IN THE KIT. DO NOT INSTALL THIS ACCESSORY WITHOUT THE AFORE­
MENTIONED LOCK & SEAL ADHESIVE.
Push Pin Removal Tool
10mm Socket
MOPAR® Blue Lock
& Seal Adhesive or
Equivalent
PROCEDURE STEPS:
NOTE: For safety, ease of installation and to avoid
damage to any parts, it is recommended to have an
assistant aid in installing this kit.
1. Prior to installation, paint the hood and the hood scoop
supplied in the kit to match the vehicle's body color
or color as desired. Let paint dry thoroughly before
proceeding with installation.
2. If desired, paint the hood scoop bezels supplied in the
kit to match the vehicle's body color or color as de­
sired. Let paint dry thoroughly before proceeding with
installation.
3. Pre­assemble the hood scoop (2) by installing the five
J­clips (1) to the rear underside of the scoop (2).
Jan 21, 2011
www.mopar.com
Description
Hood
Hood Scoop Bezel
Hood Scoop
Gasket
Tape Patch (Single Adhesive)
Hood Scoop J­clips
Hood Scoop Nuts
Bezel Screws

TOOLS REQUIRED

Small Pick/Pry Tool
Ratchet w/ Extension
Torque Wrench set for in.lbs. Torque Wrench set for ft.lbs.
Parts
Supplied in kit
Supplied in kit
supplied in kit
supplied in kit
supplied in kit
supplied in kit
supplied in kit
supplied in kit
supplied in kit
supplied in kit
Phillips Head Screwdriver
70% Isopropyl Alcohol
Quantity
1
2
1
1
1
1
1
5
5
6
13mm Socket
Water
Magnetic Retrieving Tool
K6869570 Rev 2