Mopar 82211665AD Instrucciones De Montaje página 8

8
30. Transfer and position the hood latch striker (1) and
mounting screws (2) to the underside of the kit hood
(3).
31. Install and tighten the two screws (2) that secure the
striker to the hood inner reinforcement. Tighten the
screws to 28 N∙m (21 ft. lbs.).
32. Transfer the wiper nozzles (1) into the kit hood.
NOTE: Make sure to use the correct kit supplied wind­
shield washer fluid hose for your model year vehicle.
33. Connect the wiper hose (2) included in kit to the wind­
shield wiper nozzles (1).
34. Install the wiper hose (2) included in kit to the formed
flange of the hood.
Jan 21, 2011
www.mopar.com
K6869570 Rev 2