3M G22C Manual De Instrucciones página 73

APPROVALS
These products meet the requirements of the European
Community Directive 89/686/EEC (Personal Protective
Equipment Directive) and are thus CE marked.
Certification under Article 10, EC Type-Examination, has
been issued for these products by the Swedish National
Testing and Research Institute, SP, Box 857, SE-501 15
Boras, Sweden (Notified Body number 0402).
MARKING
{ Date of Manufacture
? See instructions for use.
^ Warning
] Temperature Range
, Maximum Relative Humidity
Material: UV-Stabilised ABS
CLEANING INSTRUCTIONS
The helmet, head harness and sweatband should be
cleaned regularly using a mild solution of detergent in
warm water.
STORAGE AND TRANSPORTATION
Plastic material ages when exposed to UV light, for
example long term exposure to direct sunlight.
^ Do not store the safety helmet in direct sunlight or at
high temperatures.
When not in use, it should be stored in a cool, dark
location to prevent the material from ageing.
The 'in-use' life of the product will vary with frequency
and conditions of use.
In everyday use it is recommended that the product is
discarded after 7000 hours service although some
extreme conditions may result in deterioration over a
shorter period.
The original packaging is suitable for transporting the
product.
SPARE PARTS
Standard Suspension (Figure 3)
G2C - Plastic Sweatband (HYG3)
G2D - Leather Sweatband (HYG4)
ACCESSORIES
Rain Shield (Figure 4)
Orange GR3C
Orange/Fur GR3D
Yellow GR3C GU
Hearing Protectors (Figure 5)
See appropriate product user instruction
Visors and Mesh Visors (Figure 6)
Chinstrap GH1 (Figure 7)
Attachment for Visor P3E (Figure 8)
Visor Seal (Figure 9)
Orange GR2B
Yellow GR2B GU
COMPREHENSIVE HEAD
PROTECTION
When you use other protective equipment together with
your helmet, it is important that all the components
included in the helmet system fit together without
compromising the special comfort and convenience
requirements applied to each individual component in
the system.
It is vital that there is sufficient space for the hearing
protector and that it can be conveniently adjusted to fit the
ears. In other words, the helmet itself should not extend
too far down or there should be cutouts to accomodate
the hearing protectors. The combination of helmet and
visor must also function properly as regards the distance
to the face, focus of vision, sealing etc.
Your 3M™helmet can be supplemented with other 3M™
equipment such as hearing protectors, visors and
communication systems.
71