Recommend:
5.
• When setting the minute hand, first advance it 4
VR32
to 5 minutes ahead of the desired time and then
turn it back to the exact minute.
N 1
2
Push back to
Normal position
• Push the crown back to the normal position.
How to use stopwatch functions
• The stopwatch can measure up to 29'59" in one-second increments.
• When the measurement reaches 30 minutes, the stopwatch automatically stops counting.
* Before using the stopwatch, be sure to check that the crown is set at the normail position and that the
stopwatch hands are reset to the "0" position.
Note: If the stopwatch hands do not return to the "0" position when the stopwatch is reset to "0", follow
the procedure in "Stopwatch hand position adjustment".
• The stopwatch second hand is capable of timing 30 minutes. (60 seconds x 30 times)
• The stopwatch minute hand is capable of timing 30 minutes.
• Whether the stopwatch hands return to the "0" position in a clockwise rotation or in a counterclockwise
rotation is decided depending on the elapsed time the stopwatch has measured.
Stopwatch hand position adjustment
If the stopwatch hands are not in the "0" position, follow the procedures below to set them to the "0"
position.
1.
VR32
• Pull the crown out to the 2nd click position.
N 1
2
Note: While the stopwatch is running or has
been stopped while running, if the crown is
pulled out to the 2nd click position, the
stopwatch will be automatically reset.
Pull out to
2nd position
STOPWATCH
Standard Measurement
minute hand
A
A
Start
Stop
A
VR32
Accumulated Elapsed Time Measurement
A
A
SPLIT
Start
Stop
SPLIT RELEASE
B
Note: Restart and stop of the stopwatch can be repeated by pressing
RESET
Button "A."
STOPWATCH
Split Time Measurement
second hand
A
B
Start
Split
Note: Measurement and release of split time can be repeated by pressing
Button "B."
Measurement of Two Competitors
A
B
Start
Finish Time
of 1st
Competitor
Press A.
2.
3.
to move the
VR32
A
stopwatch hands
clockwise.
Press B.
to move the
B
stopwatch hands
counterclockwise.
• Press Button "A" or "B" to set the stopwatch hands
• Push the crown back to the normal position.
to the "0" position.
• The movements of the stopwatch minute hand and
stopwatch second hand are interlocked. To set the
stopwatch minute hand to the "0" position, continue
to move the stopwatch second hand until the
stopwatch minute hand reaches the "0" position.
Note: The stopwatch minute and second hand move
quickly if Button "A" or "B" is kept pressed.
B
Reset
A
A
B
Restart
Stop
Reset
B
A
B
Split
Stop
Reset
Release
A
B
B
2nd
Finish Time
Reset
Competitor
of 2nd
Finishes
Competitor
VR32
N 1
2
Push back to
Normal position