6
14. Remove the B+ terminal nut (1) from the Totally Inte
grated Power Module (3) (TIPM) B+ terminal. Remove
the B+ cable (2) from the TIPM.
15. Using a suitable flat blade tool, disengage the TIPM
upper retaining tabs from the battery tray bracket.
16. Grasp the TIPM (1) and rotate the assembly up to free
it from its mounting bracket (3). Position the assem
bly upside down to access the electrical connectors
located on the bottom of the unit.
17. Disconnect the connector C4, letter D labeled on the
bottom of the TIPM. Release by depressing the lock
ing tab and rotating the connector arm outboard, until
the connector is free from the TIPM assembly (1). Be
certain to pull the connector straight off.
Jun 21, 2010
4280312
K6861080