Singer SteamWorks Pro Manual De Instrucciones página 5

Crease Attachment Assembly and Use
• Turn the steamer off and wait until there is no steam coming from
the Steam Head. And it is completely cool to the touch.
• Connect the flute of the Crease Attachment to the pegs at the
bottom of the Steam Head.
• Push the Crease Attachment into place gently until it clicks.
• To use, place the fabric between the Steam Head and the Crease
Attachment to create the crease. Move the Steam Head in a vertical
motion to press the crease.
Fabric Brush Assembly and Use
• Turn the steamer off and wait until there is no steam coming from
the Steam Head and it is completely cool to the touch.
• Insert the pegs on the Fabric Brush into the holes in the Steam
Head.
• Steam as usual, using the Fabric Brush to smooth stubborn
wrinkles.
E_Instruction Manual.indd 3
GBR
3
12.12.2011 17:18