Care and maintenance
EN
22
Cleaning the filters
The filters remove food residue from the water
used in the wash cycle: to obtain the best results
from each wash, they should be cleaned.
Clean the filters regularly.
After cleaning check that the filter assembly has
been replaced correctly.
The dishwasher should not be used without
filters.
The dishwasher should not be used without
filters, or when the filter is loose.
1. Remove the filters by pulling the handle
upwards.
2. Clean the filters:
C
1
2
A
B
C
B
A
non-metallic brush to clean these parts.
3. Reconstruct the filter assembly and replace it in
the correct position, following movements 1 and 2
as shown in the figure, until it clicks into place.
Leaving the machine unused for
extended periods
• Run a wash cycle when the dishwasher is
empty.
• Unplug the appliance and disconnect the water
supply.
• Leave the door of the appliance ajar.
• after every wash
cycle, remove the
largest pieces of
residue from
semicircular plate A
and glass B (these
may be removed by
pulling the handle) by
rinsing them under
running water.
• The entire filter
assembly should be
cleaned thoroughly
once a month: this
includes the
semicircular plate A,
the glass B and the
cylinder C (this may
be removed by turning
it in an anti-clockwise
direction). Use a small