IKA topolino Manual De Instrucciones página 5

surface on which it is set up.
• The device will automatically restart following any interruption to
the power supply.
• The appliance may heat up when in use.
• The voltage stated on the type plate must correspond to the
mains voltage.
• Protect the appliance and accessories from bumps and impacts.
• The appliance and the power supply unit are maintenance-free
and must not be opened.
Intended use
• Use
- for mixing liquids
• Range of use
Indoor environments similar to that a laboratory of research,
teaching, trade or industry area.
Unpacking
• Unpacking
- Please unpack the device carefully
- In the case of any damage a detailed report must be sent imme-
diately (post, rail or forwarder).
• Contents of package
- Magnetic stirrer
-
Power supply unit with exchangeable adapters
- Operating instructions
Operation
• Starting up
- Set the knob to the left stop (you will hear and feel it clicking
into place).
- Place a magnetic rod in a vessel which is penetrable for
magnetic field lines and fill the vessel with the medium to be
processed.
- Place the vessel on the centre of the heating plate.
- Connect the appliance to a socket (the voltage stated on the
nameplate must correspond to the mains voltage).
- Set the speed using the knob (Turn to right to increase speed;
turn to left to reduce speed).
• Shutting down
- Set the knob to the left stop (you will hear and feel it clicking into
place), the motor is switched off.
- Disconnect appliance from mains when not in use.
Maintenance and cleaning
The device is maintenance-free.
Cleaning
- For cleaning disconnect the mains plug!
- Use only cleaning agents which have been approved by IKA to
clean IKA devices.
These are water (with tenside) and isopropanol.
- Wear protective gloves during cleaning the devices.
- Electrical devices may not be placed in the cleansing agent for the
purpose of cleaning.
- Do not allow moisture to get into the device when cleaning.
- Before using another than the recommended method for clean-
ing or decontamination, the user must ascertain with IKA that this
method does not destroy the device.
Warranty
In accordance with IKA warranty conditions, the warranty period
is 24 months. For claims under the warranty please contact your
local dealer. You may also send the machine directly to our factory,
enclosing the delivery invoice and giving reasons for the claim. You
will be liable for freight costs.
The warranty does not cover worn out parts, nor does it apply to
faults resulting from improper use, insufficient care or maintenance
not carried out in accordance with the instructions in this operating
manual.
8
Technical data
Rated voltage VAC 100 - 240
Rated frequency Hz 50/60
Input power W 10
Output power W 7.2
Speed (adjustable) rpm 0 / 500...1800 ±25%
Operating time % 100
Ambient temperature °C +5 ... +40
Ambient humidity (relative) % 80
EN 60529 protection class IP 21
Pollution degree 2
Overvoltage category II
Protection class III
Transport temperature °C -25 to +70
Storage temperature °C -10 to +70
Operation at a terestrial altitude m max. 2000 above sea level
Test tube size (max.) mm ø 80
Stirring bar (max.) mm ø 6 x 30
Max. stirring quantity ml 250
Dimensions mm 95 x 115 x 37
Weight kg 0.32
Subject to technical changes!
9