Metra 99-9604 Manual Del Usuario página 4

ISO DDIN radio provision
Option 1
1. Secure the radio brackets to the
radio using the screws supplied with
the radio. (Figure A)
Note: The screws in the top section
of the radio must be flush in the radio
brackets in order to properly slide
into the factory sub-dash. (4) 5mm x
12mm Phillips flat-head screws have
been supplied if the radio does not
supply these type of screws.
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections
to the radio. Metra recommends
using the proper mating adapter from
Metra and/or AXXESS. Test the radio
for proper operation.
3. Slide the completed assembly into
the dash.
Note: The radio will simply
compress in.
Kit Assembly
4. Attach the radio trim panel over the
radio and then secure it using the
(4) factory screws removed in dash
disassembly.
5. Reassemble the dash in reverse
order of disassembly.
(Figure A)
99-9604
Option 2
1. Secure the radio brackets to the
radio using the screws supplied with
the radio. (Figure A)
Note: The screws in the top section
of the radio must be flush in the radio
brackets in order to properly slide
into the factory sub-dash. (4) 5mm x
12mm Phillips flat-head screws have
been supplied if the radio does not
supply these type of screws.
2. Slide the radio into the factory
sub-dash bracket removed in dash
disassembly, and then secure it with
the (4) #8 x 3/8" Phillips pan-head
screws provided, (2) on each side.
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or AXXESS. Test the radio for proper
operation.
4
4. Install the radio/sub-dash assembly
back into the dash using the (4)
factory screws removed in dash
disassembly.
Note: The (2) screws inside the
cavity will not be reused.
5. Attach the radio trim panel over the
radio and then secure it using the
(4) factory screws removed in dash
disassembly.
6. Reassemble the dash in reverse
order of disassembly.