Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Unsnap and remove the trim panel
around the outside of the radio, switches,
and climate controls. (Figure A)
2. Remove (4) T-20 Torx screws to remove
the radio. (Figure B)
There are (2) different methods for
installing this kit. Option 1 does not require
the kit to be secured to the sub-dash
bracket whereas option 2 does. If choosing
option 1, skip to kit assembly. If choosing
option 2, proceed to the next step.
3. Using a pick tool, release (2) clips securing
the climate control switches . (Figure C)
3. Remove (6) T-20 Torx screws to remove
the radio sub-dash bracket: (2) at the
top, (2) at the bottom, and (2) inside the
cavity at the bottom. (Figure D)
Note:
It is not necessary to completely
remove the bracket and connectors. Kit
assembly can be performed inside the
vehicle to avoid this if so desired.
Continue to kit assembly
99-9604

Dash Disassembly

(Figure A)
(Figure B)
2
(Figure C)
(Figure D)

Publicidad

loading