Changing The Filter Cartridge - Brita PURITY C Manual De Instrucciones

5 Changing the Filter Cartridge

The PURITY C fi lter cartridge must be replaced once the stated capacity has been reached
(see Chapter 6), in accordance with manufacturer's specifi cations or no later than 12 months after
commissioning, whichever occurs fi rst.
Caution: When changing a fi lter, examine all remaining parts carefully! Faulty parts must be
!
replaced and contaminated parts should be cleaned! Read the operating and safety information
(Chapter 3) before changing the cartridge. After storage and transport below 0 °C, the product must
be stored in the open original packaging for at least 24 hours before it is commissioned at the stated
ambient temperatures (Chapter 9) for operation.
Note: When the locking handle is open, the water supply to the cartridge is interrupted and short-
circuit operation with direct water fl ow from the water inlet
necessary, close water intake and switch off power supply to the terminal equipment).
• Open locking handle
• Activate the fl ush valve
• Remove exhausted fi lter cartridge
cartridge.
Note: The fi lter cartridge can be pivoted by 90° in the wall mounting bracket for easy removal.
• Perform the steps described at 4.3 and 4.4.
6 By-Pass and Capacity Tables
6.1 PURITY C Quell ST
The fi lter capacity tables for coffee/espresso machines, vending machines, combi ovens and con-
ventional ovens are listed on pages 2–5.
Note: The stated capacities were tested and calculated based on standard application and machine
conditions. This information may vary according to external infl uencing factors (for example, fl uctuat-
ing crude water quality and/or machine type).
6.2 PURITY C AC
The PURITY C1000 AC fi lter system has a fi lter capacity of 10,000 litres, irrespective of carbonate
hardness and the by-pass proportion setting. All the intake water is fi ltered (Chapter 4.2).
7 Repair
Regularly check the fi lter system for leaks. Regularly check the hoses for kinks. Bent hoses must be
replaced.
The complete fi lter system must be replaced in rotation after 10 years. The hoses must be replaced
in rotation after 5 years.
Caution: Before replacing fi lter systems or hoses, read the technical data (Chapter 9) and the
!
operating and safety information (Chapter 3).
Regularly clean the outside of the fi lter system with a soft, damp cloth.
Caution: Do not use any abrasive chemicals, cleaning solutions or astringent cleaning agents.
!
18
.
2
and depressurise the system.
8
from the fi lter head
6
to the water outlet
4
, bearing in mind the weight of the
1
is possible (if
3