Maintenance - Extremis INUMBRA Manual De Instrucciones

MAINTENANCE

FABRIC
Clean the fabric of the parasol and
the slip over cover by rinsing it with
water and hand soap, cleaning it
with a soft brush. First and foremost
beware that the parasol does not get
dirty and use the slip over cover as
much as possible.
We strongly advise you not to use a
high-pressure hose.
Do not use any aggressive detergents,
as they will remove the protective
coating of the fabric.
In order to extend the life span of the
spindle inside Inumbra's parasol
pole, we highly recommend the use
of silicone spray grease. Apply the
silicone grease when the parasol fully
mounted.
1. Close the parasol completely and
lift one of the spines so that you
can move under the fabric.
2. Look and move upwards and spray
the silicone grease all along the
groove in the pole.
3. Open and close the parasol a few
times so that the silicone grease
can equally spread over the
spindle. Now the spindle is
lubricated so that the parasol
opens and closes more easily. The
silicone grease also provides a
protective layer making the
spindle less prone to corrosion.
Silicone spray grease can be
purchased in most DIY stores. We
recommend using 'Würth'
silicone spray,available worldwide
(seewww02.wuerth.com).
STAINLESS STEEL TUBE
Stainless steel is not sea water
proof. Especially in an aggressive
environment (maritime
chlorine, acid rain,
industrial or urban environment) we
recommend to frequently use surface
cleansing, the adequate products
necessary therefore are generally
available.
climate,
aggressive
english 11