Descargar Imprimir esta página

Assembly Inumbra Into Gargantua; Assembly Inumbra Into Pantagruel; What You Need - Extremis INUMBRA Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 54

ASSEMBLY INUMBRA INTO GARGANTUA

WHAT YOU NEED

1 person
no. 5 hex key
+/- 20 min.

ASSEMBLY INUMBRA INTO PANTAGRUEL

WHAT YOU NEED
1 person
no. 5 hex key
+/- 20 min.
2. Put the inumbra insert in the hole in the middle of the
tabletop. Make sure that its conical part is facing
upwards. Fasten the insert to the table, putting the
bolts through the bottom of the table.
1. Your assembled Gargantua table
has a central cube, which keeps
the four legs together (see
Gargantua manual). Remove this
cube and replace it with the
special parasol cube. Make sure
its conical part is facing upwards
and is protruding from the
tabletop.
1. Remove the Lazy Susan from the Pantagruel.
3. Put the Lazy Susan back into its original position.
4. Put the parasol on the stainless steel tube as explained
in point 6 - 7 - 8 on page 7.
2. Install the parasol's tube onto the
stainless steel tube as explained in
point 6 - 7 - 8 on page 7.
english
5

Publicidad

loading

Productos relacionados para Extremis INUMBRA