Publicidad
Idiomas disponibles
Idiomas disponibles
Applied/Apply: Confirmed. After adjusting the above two options, you need to select the confirmation
that to become effective.
format:
PCM format. it is 20bit when the config mode is normal, and can not be manually adjusted.
When the config mode is advanced, it can be manually adjusted 16,20,24 bit;
Refresh:
Refresh network audio routing. Network audio may change in
the midway due to the software operation, this option is used to refresh
the screen shows the current actual routing;
Reset:
reset all the parameters in this page.
3.4.IP
Auxiliary IP management
ticIP> automatically update to the final allocation IP, i.e. it achieves to keep the IP function of the last
shut down before when you start every time;
4.DSP
ALL/CH1/CH2: Enter
into the correspon-
ding channel and
set up.
LinkChs: Linkage
mode; Each chan-
nel can select to be
separate or follow
the other channels;
Delay: Delay time;
This version is adjus-
table within 0~1365
ms.
Gain: Delay gain,-
60dB ~ +24 dB, com-
monly use to sepa-
rately set the gain in
a certain unit of the
linear array.
4.1Delay
40
By setting the Manual, start the manual set-
ting IP every time. i.e. the terminal does not
require the IP settings;
Static: It will automatically initialize the termi-
nal IP to the settings in <Static IP> every time
when you start, changing the current termi-
nal IP will not affect the setting static IP;
Retain: In addition to the function of the Sta-
tic option, also can make the value of <Sta-
Publicidad
