Aux Operations; Trouble Shooting - Clarion CZ102E Manual De Instrucciones Y De Instalación

CD/MP3/WMA Operations
3. Press [ 2 ] button repeatedly until "RPT OFF"
appears on the display to cancel repeat
playback, and "RPT" segment goes off.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [ 3 ] button to perform random play.

AUX Operations

Press [SRC /
] button on the panel to select
"AUX".
AUX is just for audio content with 3.5mm Jack
connector plugged into audio-in socket on the
front panel.
AUX Input sensitivity setting
1. Press and hold the [DISP] button (1 sec.).
2. Turn the [VOLUME] knob to select "AUX
SENS".
3. If the output level of connected external audio
player is "HIGH", rotate [VOLUME] knob
and choose "LOW". And if the output level is
"LOW", choose "HIGH".

6. TROUBLE SHOOTING

GENERAL
Problem Cause
Unit fuse blown.
Unit can not
power on.
Car battery fuse blown.
Unit can not
power on.
Nothing happens
The microprocessor has
when buttons are
malfunctioned due to noise, etc.
pressed.
Display is not
accurate.
Improper audio output
connection.
Volume set too low.
No/low audio Speakers damaged.
output.
Heavily biased volume balance. Adjust the channel balance to center
Speaker wiring is in contact with
metal part of car.
Non-standard disc used.
Speaker power rating does not
Poor sound
match unit.
quality or
distortion.
Wrong connections.
Speaker is shorted.
Tel-Mute
MUTE wire is grounded.
malfunction.
Unit resets itself
Incorrect connection between
when engine
ACC and Battery.
is off.
Measure
Replace with new fuse of correct rating.
Replace with new fuse of correct rating.
Turn off the power and remove the DCP.
Press the [RESET] button with a thin rod.
Note:
When the [RESET] button is pressed, turn
off the ACC power.*
* When the [RESET] button is pressed,
preset radio stations, titles, etc. stored in
memory are kept.
Check wiring and correct.
Increase volume level.
Replace speakers.
position.
Insulate all speaker wiring connections.
Use a standard disc.
Replace speakers.
Check wiring and correct.
Check wiring and correct.
Check the MUTE wiring and correct.
Check wiring and correct.
CZ102E/CZ102ER/CZ102EG/CZ102EA
8