Safety Instructions - Beko DP 207 Manual De Instalación

Safety instructions

1 Safety instructions
Please check whether this instruction corresponds with the instruments type.
Please observe all notes indicated in this instruction manual. It contains essential information
which have to be observed during installation, operation and maintenance. Therefore this in-
struction manual has to be read categorically by the technician as well as by the responsible
user / qualified personnel before installation, initiation and maintenance.
This instruction manual has to be available at the operation site of DP 207 at any time.
Regional respectively national regulations have to be observed in addition to this instruction
manual if necessary.
In case of any obscurities or questions with regards to this manual or to the instrument please
contact BEKO TECHNOLOGIES.
Warning !
Compressed air !
Contact with quickly or abruptly escaping compressed air or bursting plant components
may cause severe injuries or death.
Measures :
• Do not exceed the maximum operating pressure (see type label)!
• Only use pressure-resistant installation material!
• Avoid persons or objects being hit by escaping compressed air!
Warning !
Supply voltage !
Contact with supply voltage carrying non-insulated parts may cause an electric shock
with injury and death.
Measures :
• Observe all applicable regulations for electrical installations (e. g. VDE 0100)!
• Carry out maintenance work only in disconnected state!
• All electric works are only allowed to be carried out by authorized qualified personnel.
Warning !
Inadmissible operating parameters !
Undercutting respectively exceeding of limit values may cause danger to persons and
material and may lead to functional and operational disturbances.
Measures :
• Do not exceed maximum operating pressure (see type label)!
• Make sure that DP 207 is only operated within the admissible limit values indicated on the type label.
• Careful observation of the performance data of DP 207 in connection with the application.
• Do not exceed the admissible storage and transportation temperature.
• Carry out maintenance and calibrations in regular intervals.
4 DP 207