Silva ex10 Manual Del Usuario página 2

full version manual
10
ex
Package contents
Pedometer
Neck lanyard
Belt clip
Batteries LR44
User guide
general information
The ex pedometer uses a built-in sensor that senses the
10
acceleration. The unit's location/direction is important, as the
maximum tilt angle is 45º measured from a vertical line, see image
1
1
.
in order to count steps accurately, it is important that the
pedometer does not swing.
the pedometer is not waterproof, therefore keep it dry and treat
it carefully.
the pedometer does not have an on/off button, as the power
consumption when not in use is extremely low
Wearing the Pedometer
In order to work properly, the ex pedometer is designed to be worn
10
around the neck using the included neck lanyard. The lanyard
features a quick release that prevents strangling when the
pedometer is worn around the neck.
changing the battery
Change batteries when the display dims. Twist the upper part of the
pedometer and pull out the battery holder to access the batteries.
See image 2. Change batteries (type LR44).
2
PoWer savings
To save power, the pedometer's LCD will go to standby mode after
having been idle for 80 seconds. The LCD will come to life again by
pressing any button or when movement is detected.
steP filter function
The Pedometer has a filter function, which prevents the accidental
registration of steps when standing still or when making short
accidental movements that are not part of the walk/jog. For correct
step counting, the pedometer uses a 10 second filter. This means that
the pedometer needs to be used for 10 seconds before the number of
steps is updated on the display.
instructions for the ex
10
This model is designed to count the number of steps taken and to
show the distance walked. To be able to show distance, the stride
length has to be entered.
main functions
Press the MODE button to browse through the following functions:
• Step counting, STEP shown on the display
• Distance measurement, KM or MIL shown on the display
resetting the Pedometer
Press and hold the MODE and SET buttons simultaneously to reset
the counter.
art.no 56055
Personal settings
changing of distance unit
The Pedometer's default setting is metric (Km for distance and cm
for stride length). This can be changed to Imperial (miles and ft).
Press the SET and MODE button simultaneously to reset data, and
then continue pressing the buttons for 5 seconds to change
between metric and imperial.
calculating stride length
The easiest way to calculate the length of your stride is to walk 10
steps and then measure the distance travelled. Divide the distance
by 10 to find the stride length.
setting stride length (30-240cm)
The default setting is 75cm (3 ft).
Press MODE until the text KM appears in the display.
Press and hold SET until the current stride length begins flashing.
Press MODE repeatedly to increase the stride length to the desired
value (increases by 1 cm per press, or 0,1 ft if MIL is selected).
Press and hold MODE and the stride length value will increase
faster.
Once the stride length is set, the pedometer automatically returns
to the distance mode after 5 seconds or by pressing SET.
sPecifications
Temperature range Operation: -0 °C to +50 °C
Storage: -10 °C to +60 °C
Battery type: LR44
Battery lifetime approx. 6 months at 10 000 steps/day.
Protect the environment
All parts included in this product including batteries should be
recycled and must not be thrown away in the regular trash. Dispose
of these items in accordance with applicable local regulations.
Warranty
Silva warrants that, for a period of two (2) years, your Silva product
will be substantially free of defects in materials and workmanship
under normal use. Silva's liability under this warranty is limited to
repairing or replacing the product. This limited warranty extends
only to the original purchaser. If the product proves defective during
the warranty period please contact the original place of purchase.
Make sure to have your proof of purchase on hand when returning
the product. Returns cannot be processed without the original
proof of purchase. This warranty does not apply if the product has
been altered, not been installed, operated, repaired, or maintained
in accordance with instructions supplied by Silva, or has been
subjected to abnormal physical or electrical stress, misuse,
negligence or accident. Neither does the warranty cover normal
wear and tear. Silva is not responsible for any consequences, direct
or indirect, or damage resultant from use of this product. In no
event will Silva's liability exceed the amount paid by you for the
product. Some jurisdictions do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This Warranty is valid and may be
processed only in the country of purchase.
For more information please visit www.silva.se
Pedometer
Visit: www.silva/enviroment
for more information about the
Waste Electrical and Electronic
Equipment (WEEE) Directive.