Radio Operation - Sangean DT-220 Instrucciones De Manejo

Alarm time (Standby) set
To set the alarm only when radio is off.
Press Standby button , display alarm icon
6
last alarm time will appear. Press Standby button
again for more than 2 seconds until display alarm icon
also last alarm time flashes. Press tuning UP/DOWN
button to set the alarm hour then press Standby
button again to set the minute. Press Standby button
again to finalize Alarm time set. Display will be back
to real time after alarm time set is done. Alarm icon
will appear on the display indicating in Alarm
(standby) status.
When alarm is on, press any push buttons to switch
it off and back to Alarm status. The alarm buzzer will
last for 3 minutes before it is switched off.

Radio operation

Tuning the station
Turn on the radio by pressing POWER button
select desired radio band by pressing BAND button
Use Tuning UP/DOWN button to tune in stations.
For an automatic station search , press
until frequency display starts advancing on it own.
Then release the button.
The tuning function will stop automatically when a
power signal from a station is found . The search can
be broken off by pressing the button for the opposite
direction.
also
GB
,
7
.
11
or button
5