English (GB) Installation and operating instructions
Original installation and operating instructions
CONTENTS
1.
1.1
1.2
1.3
1.4
1.5
1.6
1.7
2.
2.1
2.2
2.3
3.
3.1
3.2
3.3
3.4
3.5
4.
4.1
4.2
4.3
4.4
4.5
4.6
5.
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.11
6.
7.
Page
7.1
7.2
5
5
8.
5
8.1
6
8.2
8.3
6
8.4
6
8.5
7
8.6
7
9.
8
10.
8
8
Warning
9
Prior to installation, read these installation
10
and operating instructions. Installation and
10
operation must comply with local
11
regulations and accepted codes of good
11
practice.
11
11
1. Safety instructions
12
These installation and operating instructions contain
12
general instructions that must be observed during
12
installation, operation and maintenance of the pump.
It must therefore be read by the installation engineer
12
and the relevant qualified operator prior to
13
installation and start-up, and must be available at the
13
installation location at all times.
14
1.1 Symbols used in this document
16
16
17
Warning
17
If these safety instructions are not
observed, it may result in personal injury.
17
17
If these safety instructions are not
18
Caution
observed, it may result in malfunction or
19
damage to the equipment.
20
21
Notes or instructions that make the job
Note
21
easier and ensure safe operation.
21
22
1.2 Qualification and training of personnel
23
The personnel responsible for the installation,
24
operation and service must be appropriately
24
qualified for these tasks. Areas of responsibility,
25
levels of authority and the supervision of the
personnel must be precisely defined by the operator.
25
If necessary, the personnel must be trained
26
appropriately.
26
26
27
28
28
29
30
31
32
33
34
34
34
34
35
36
37
38
38
5