TensCare PR13TC Indicaciones Para El Uso página 9

Instructions for Use
1. Remove the electrode from packaging and clean as above.
2. Insert the lead in this pack into the probe.
3. Apply a thin coating of lubricating gel such as TensCare Go
Gel to the electrode and insert until the flange at the base
of the electrode is sited between the labia.
4. Ensure that the muscle stimulator or EMG biofeedback equip-
ment is turned off and connect the unit to the electrode via the
connector ends.
5. Follow manufacturer's instructions to operate the stimulator or
biofeedback unit.
6. After use, turn off equipment. Disconnect the cable from the
electrode and clean as above.
3