Axis Communications Q60 Serie Guia De Instalacion página 19

1
Screw T30 (3x)
2
Slot for unit holder (3x)
3
Safety wire
5. Connect the network cable and, if used, the multi-connector cable to the camera.
NO TICE NO NO TICE TICE
• Be careful not to damage the cables when connecting them.
• Make sure that the foam gasket holes are aligned with the cable tracks. If using a
multi-connector cable, remove the cut-out piece for the multi-connector cable from
the foam gasket.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
AXIS Q60 Series
19