General Safety Rules; Technical Data - Felisatti MF800VE Instrucciones De Servicio

MIixer
Rated power
No load speed
Work shaft thread
Weight according EPTA-Procedure 01/2003
The instructions contained in this manual must be
strictly followed, it should be carefully read and kept close
at hand to use when carrying out maintenance on the
indicated parts.
If the machine is used carefully and normal
maintenance is carried out, it will work well for a long time.
The functions and use of the tool you have bought
shall be only those described in this manual. Any other use
of the tool is strictly forbidden.
The service life is 3 years.
ILLUSTRATIONS
DESCRIPTION (See figures)
A Safety push button switch (Fig.1) (except MF1050VE2)
B On-/off switch (Fig.1)
C Drill chuck shaft gap (Fig.1)
D Mechanical speed shift lever (Fig.3) (except
MF800VE)
E Auxiliary grip (Fig.1)
F Speed adjustment (Fig.1)
G Lock-on button for On/Off switch (for MF1050VE2)
EQUIPMENT
- M14 adapter (except MF1050VE2) 1 psc.
- Mixing rod
- Safety rim*
- Open-end spanner (size 19 mm)* 1 psc.
- Open-end spanner (size 24 mm)* 1 psc.
- Allen key S4*
- Screw*
- Operating instructions
- Safety instructions
- Warranty
* only for MF1050VE2

GENERAL SAFETY RULES

WARNING! Read all instructions Failure to follow
all instructions listed below may result in electric shock,
fi re and/or serious injury. The term "power tool" in all of
the warnings listed below refers to your mains operated
(corded) power tool or battery operated (cordless) power
tool.
SAVE THESE INSTRUCTIONS
1) Work area
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodifi ed plugs
and matching outlets will reduce risk of electric shock.

TECHNICAL DATA

MF800VE
W 800
min 150-570
-1
5/8''x16 UNF
kg 2,4
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not use
a power tool while you are tired or under the infl uence of
drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate
1 psc. conditions will reduce personal injuries.
2 psc. c) Avoid accidental starting. Ensure the switch is in the
off position before plugging in. Carrying power tools with
your fi nger on the switch or plugging in power tools that
1 psc. have the switch on invites accidents.
8 psc. d) Remove any adjusting key or wrench before turning
1 psc. the power tool on. A wrench or a key left attached to a
1 psc. rotating part of the power tool may result in personal injury.
1 psc. e) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can
reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before
making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools
MF1050VE2 MF1200/VE2
1100
130-445/245-850 120-405/245-825
М14х2 5/8''x16 UNF
4,3
1200
4,6
3