Autonomous Monitoring System "Universum Ms; Guitar Autonomous Sound System) - UNIVERSUM GUITARS ELENA Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 106
For playing in acoustic sound mode it is necessary to connect the guitar through the output
connector to the external power amplifier designed only for sound reinforcement of
ACOUSTIC musical instruments (microphone pickups).
Turning on the acoustic sound mode is performed by moving the system shift valve
anticlockwise to the fixed limit position (Fig14, Pos.15). The valve performs the function of
protection device preventing from an accidental microphone pickup turn on in the other guitar
operation modes.
System has two operation modes - acoustic (microphone pickup) and combined (microphone
and electromagnetic pickups). Operation mode switching is performed using a three-position
switch-mixer (Fig.17 Pos.2).
IMPORTANT: IT IS FORBIDDEN to connect the guitar from the output connector of acoustic
sound mode to the external guitar power amplifier (electromagnetic pickups). Correct
system operation can be provided only by the external power amplifier designed for
sound reinforcement of ACOUSTIC musical instruments (microphone pickups).
AUTONOMOUS MONITORING SYSTEM "UNIVERSUM MS" (SOLID BODY ELECTRIC

GUITAR AUTONOMOUS SOUND SYSTEM)

Certain guitar models of "UNIVERSUM GUITARS "ELENA" product line are equipped with
autonomous monitoring system "UNIVERSUM MS" (solid body electric guitar autonomous
sound system).
System is designed for sound reinforcement of the solid body electric guitar without
connecting to the external amplifier.
The volume of the reinforced sound at the system turned on is enough for performance to
clearly hear the sound from electric guitar without connecting to the external amplifier. This
is necessary for rehearsals and guitar setting under any conditions as well as for recording
musical compositions as well as for playing with sound reinforcement from guitar monitoring
system through external amplifying facilities using external microphones.
The system consists of:
- electromagnetic pickups the electric guitar is completed with (Fig.1 Pos.5);
- electronic module with operating control located in the equalizer chamber under equalizer
cover (Fig.1 Pos.26);
- acoustic horn system with portable dynamic loudspeaker and two acoustic horn outputs (Fig.
16). Output from the front part of the loudspeaker is located in the frame of bridge pickup
(Fig.1, Pos. 18, Fig16), output from the rear part of the loudspeaker is covered with onlay (Fig.1
Pos.16, Fig 16);
- on/off system switch (Fig.17 Pos. 3).
- 9V D/C independent power supply located in power supply chamber (Fig.1 Pos.28).
84

Publicidad

Tabla de contenido
loading

Tabla de contenido