Descrizione Della Tastiera; Music On Hold; Auto Redial - TTM BIG300 Professional Manual Del Usuario

Ocultar thumbs

Contenido

página de 26

/ 26
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

3.6 VIP number setting

When review incoming call, press VOL/VIP key one time, the LCD LOCK icon will light

on which means this phone number is kept as VIP number. This phone number can't be

deleted, unless disable its VIP status.

If you want to disable the phone number's VIP status, find the VIP number press VOL/VIP

key one time, then the LCD VIP icon will be off which means this number become normal

phone number now. Then it can be deleted manually.

3.7 3 one-touch memory

How to store? - In on-hook mode, input the desired number, then hold "M1, M2 or M3"

button for 3

seconds until the LCD display "

stand-by mode.

How to dial out? – Press

or pick up handset to hear a dialing tone, and then press

"M1, M2 or M3" which stored the phone number you want to dial out.

3.8 10 two-touch memory

How to store? - In on-hook mode, input the desired number, then hold "MEMO" button for

3 seconds until the LCD display "

(from digit 0 to 9) where your desired number will be stored in. Wait for a few seconds, the

phone will exit to stand-by mode.

How to dial out? - In on-hook mode, press "MEMO", LCD will display "

is twinkling , and then press the key which stored the phone number you want to dial out.

Then it will dial out automatically.

4. Off-hook operation:

4.1 Music on hold

"HOLD" allow you to interrupt a conversation without hanging up when it happens an

important or private circumstances occur on your side and you don't want the other end to

hear through the telephone. You can press this button and the other end will hear a melody.

After you finish the conversation with the third party, press this button again or "

ton to continue your phone call.

4.2 AUTO REDIAL

When press "UP+/ DOWN- " choose viewing incoming or outgoing calls, find the desired

phone number and then press BACK to call it back.

If the line is busy, when in busy tone, press BACK again, the phone will automatically redial

the calling numbers every 9-10 seconds till getting through with ringer.

", after a few seconds the phone will come back to

" , "

" is twinkling , then press the number key

MANUALE D'USO - ITALIANO

Grazie per aver acquistato questo nuovo telefono con la funzione ID chiamante. Per

garantirne il buon funzionamento, vi preghiamo di leggere attentamente le istruzioni prima

di cominciare con l'installazione.

1. Installazione

Collegamento del telefono

▪ Inserire 3 batterie modello AA nell'apposito scompartimento sotto la base

dell'apparecchio.

▪ Collegare una estremità del cavo nella presa della cornetta, e l'altra estremità del cavo

nella presa situata sul lato sinistro del telefono.

▪ Collegare una estremità del cavo di linea alla presa murale di linea telefonica, e l'altra

estremità alla presa posta sul retro della base del telefono.

Precauzione: La linea telefonica deve essere scollegata prima dell'apertura

del vano batterie!