General Safety Rules; Personal Safety; Important; Specific Safety Rules For Air Needle Scalers - Urrea UP125 Manual De Usuario Y Garantía

GENERAL SAFETY RULES

Your NEEDLE SCALER has many features that
will make your job faster and easier. Safety,
performance and reliability have been given
top priority in the design of this tool, qualities
to make easy to maintain and to operate.
WARNING: Read and understand all in-
structions. Failure to follow all indications list-
ed below, may result in electric shock, fire and/
or serious personal injury.
SAVE THESE INSTRUCTIONS.
SAFETY IN WORKING AREA
Keep your work area clean and well lit. Clut-
tered benches and dark areas may cause acci-
dents.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Some power tools create
sparks which may provoke fire.
Keep away observers, children and visitors
while operating a power tool. Distractions can
cause you to lose control.

PERSONAL SAFETY

Stay alert, watch what you are doing and use
common sense when operating a power tool.
Don't use the tool if you are tired or under the
influence of drugs, alcohol or medication. A
moment of inattention while operating power
tools may cause a serious personal injury.
Dress properly. Do not wear loose clothing
or jewelry. Contain long hair. Keep your hair,
clothing and gloves away of moving parts.
Loose clothes, jewelry or long hair can be
caught in moving parts.
Avoid an accidental starting. Be sure that the
switch is OFF before plugging in. Carrying
tools with the finger on the switch or plug in
the tool switch in ON may cause accidents.
Remove the adjusting keys or wrenches be-
fore turning the tool on. A wrench or a key
that is left close to a rotating part of the tool
may provoke a personal injury.
Do not overreach. Keep proper footing and
balance at all times. Proper footing and bal-
ance enables better control of the tools on un-
expected situations.
6
Use safety equipment. Always wear eye pro-
tection. Dust mask, nonskid safety shoes, hard
hat, or hearing protection must be used for ap-
propriate conditions.
Before connecting the tool to a power source
(receptacle, outlet, etc.) be sure that the volt-
age supplied is the same as that one specified
on the nameplate of the tool. To use a not
specified voltage may cause a serious injury to
the user as well as damage the tool.
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
SPECIFIC SAFETY RULES FOR
AIR NEEDLE SCALERS
• Always operate, inspect and maintain this
tool in accordance with all regulations (local,
state, federal and country), that may apply to
hand held/hand operated pneumatic tools.
• For safety, top performance, and maximum
durability of parts, operate this tool at 90 PSI
(6.2 bar/620 kPa) maximum air pressure at the
inlet with 3/8" (10 mm) inside diameter air sup-
ply hose.
• Always turn off the air supply and disconnect
the air supply hose before installing, removing
or adjusting any accessory on this tool, or be-
fore performing any maintenance on this tool.
• Do not use damaged, frayed or deteriorated
air hoses and fittings.
• Be sure all hoses and fittings are the correct
size and are tightly secured.
• Keep clear of whipping air hoses. Shut off the
compressed air before approaching a whip-
ping air hose.
• Always use clean, dry air at 90 PSI maximum
air pressure. Dust, corrosive fumes and/or ex-
cessive moisture can ruin the motor of an air
tool.
• Do not lubricate tools with flammable or vol-
atile liquids such as kerosene, diesel or jet fuel.
• Do not remove any labels. Replace any dam-
aged label.