LeMond pilot II Manual De Instrucciones página 9

INSTALLATION OF PILOT
Console Battery Installation:
1. Loosen the battery cover screw and remove the battery
cover from the console.
2. Insert 3 AAA batteries into the battery compartment
and reinstall the battery cover.
Batteries, AAA x3
Handlebar
Console Installation:
1. Ensure that the console turns on.
2. Open the console clamp and align the two halves
around the top center of the handlebar.
3. Insert a mounting screw into each hole and use a 4-mm
hex key to tighten the screws.
Console Clamp
Battery Cover &
Screw
Mounting
Screws
Page 9