Protecting The Environment; Technical Data; Ec Declaration Of Conformity - Stanley FATMAX FMEG222 Manual De Instrucciones

ENGLISH
Switching on and off
To switch the tool on, press the lock-off button (2) and
u
subsequently press the on/off switch (1).
For continuous operation, press the lock-on button (3) and
u
release the on/off switch.
To switch the tool off, release the on/off switch. To switch
u
the tool off in continuous operation, press the on/off switch
once more and release it.
Warning! Do not switch the tool off while under load.
Soft Start Feature
The soft start feature allows a slow speed build-up to avoid an
initial jerk when starting. This feature is particularly useful
when working in confined spaces.
No-Volt
The No-volt function stops the grinder restarting without the
switch being cycled if there is a break in the power supply.
Hints for optimum use
Firmly hold the tool with one hand around the side handle
u
and the other hand around the main handle (fig. F).
When grinding, always maintain an angle of approx. 15°
u
between the disc and the workpiece surface.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack,
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in you appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new plug.
u
Connect the blue lead to the neutral terminal.
u
8
(Original instructions)
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.

Protecting the environment

Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.

Technical data

Input voltage
Power input
Rated speed
Disc diameter
Disc bore
Max disc thickness
grinding discs
cutting discs
Spindle size
Weight
Level of sound pressure according to EN 60745:
L (sound pressure) 91.0 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 102.0 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN60745:
Surface grinding (a ) 8.2 m/s
h,SG

EC declaration of conformity

%
MACHINERY DIRECTIVE
FMEG222 Angle Grinder
Stanley Fat Max declares that these products described under
"technical data" are in compliance with:
EN60745-1:2009 +A11:2010; EN60745-2-3:2011+A2:2012
+A11:2014+A12:2014+A13:2015
These products also comply with Directive
2006/42/EC, 2014/30/EU 2011/65/EU.
For more information, please contact Stanley Fat Max at the
following address or refer to the back of the manual.
FMEG222 Type 1
V 230
AC
W 1,200
min-1 11,000
mm 125
mm 22
mm 6
mm 3.5
M14
kg 2.7
, uncertainty (K) 1.5 m/s
2 2