Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Use
Warning! Let the tool work at its own pace. Do not overload.
Carefully guide the cable in order to avoid accidentally
u
cutting it.
Be prepared for a stream of sparks when the grinding or
u
cutting disc touches the workpiece.
Always position the tool in such a way that the guard
u
provides optimum protection from the grinding or cutting
disc.
Switching on and off
To switch the tool on, press the lock-off button (2) and
u
subsequently press the on/off switch (1).
To switch the tool off, release the on/off switch (1).
u
Warning! Do not switch the tool off while under load.
Hints for optimum use
Firmly hold the tool with one hand around the side handle
u
and the other hand around the main handle.
When grinding, always maintain an angle of approx. 15°
u
between the disc and the workpiece surface.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
(Original instructions)
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
Technical data
Input voltage
Power input
Rated speed
Disc diameter
Disc bore
Max disc thickness
grinding discs
cutting discs
Spindle size
Weight
L
(sound pressure) 98.5 dB(A), Uncertainty (K) 3 dB(A)
pA
L
(accoustic power) 109.5 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Surface grinding (a
h,SG
Polishing (a
) 13.4 m/s
h,P
Disc sanding (a
) 4.5 m/s
h,DS
Wire brushing (a
) 6.1 m/s
h
Cutting-off (a
) 5.2 m/s
h
%
EC declaration of conformity
MACHINERY DIRECTIVE
KFFMEG841 Grinder
ENGLISH
KFFMEG841 (Type 1)
V
230
ac
W
2200
-1
min
6500
mm
230
mm
22
mm
6
mm
3.5
M14
kg
5.1
2
2
) 7.8 m/s
, uncertainty (K) 1.5 m/s
2
2
, uncertainty (K) 1.5 m/s
2
2
, uncertainty (K) 1.5 m/s
2
2
, uncertainty (K) 1.5 m/s
2
2
, uncertainty (K) 1.5 m/s
9
Publicidad
Tabla de contenido
