Assemble The Can Cable - Bosch BPT-M Touch Instrucciones De Instalación

30 | Electrical installation
NOTICE
BPT-M Touch | Installation manual
Each CAN bus supports a maximum of 60
interconnected system components (manufacturer's
central inverters with integrated display and
GridControl).
4. To close the CAN bus, connect the terminator
(included in the scope of delivery) to the CAN-Out
port of the last central inverter.
■
The central inverter(s) are connected.
5.2.1

Assemble the CAN cable

If you prepare the CAN cable yourself, follow the
wiring diagram.
Material damage due to incorrect connection
Incorrect wiring configuration may restrict the
correct operation of the BPT-M Touch or central
inverter or damage them.
Check the wires are assigned correctly to the

female connectors according to the wiring diagram
(4)
(5)
(1)
5.1: Wiring diagram: plug (left) and socket (right)
[1]
Not used
[2]
Not used
[3]
CAN GND
[4]
CAN H
[5]
CAN L
(3) (3)
(2) (2)
Bosch Power Tec GmbH
English
(4)
(5)
(1)