Tv/Video (Optional); Watching The Tv; Watching A Video; Storing Tv Channels Automatically - Sony CDX-M770 Manual De Instrucciones

TV/Video (optional)

You can control an optional TV tuner and TV
monitor with this unit.

Watching the TV

1
Press (SOURCE) repeatedly until "TV"
or "AUX" appears.
2
Press (MODE) repeatedly to select the
desired TV band.
TV1 TV2
t t

Watching a video

1
Press (SOURCE) repeatedly until "TV"
or "AUX" appears.
2
Press (MODE) repeatedly to select
"AUX."
Play the video.
Storing TV channels
automatically
The unit selects the TV channels with the
strongest signals and assigns them to number
buttons in order of their frequency.
Caution
If tuning in a station while driving, use
"A.Memory" (Automatic Memory) to prevent
accidents.
1
Select "TV" (see "Watching the TV" on
page 28).
2
Press (MENU), then press M or m
repeatedly until "A.Memory" appears.
3
Press (ENTER).
The unit assigns TV channels to the number
buttons in order of their frequency.
A beep sounds when the setting is stored.
28
AUX
Notes
• The unit does not assign TV channels with weak
signals. If only a few TV channels with strong signals
can be received, some number buttons will remain
empty.
• When a preset number is indicated on the display,
the unit starts assigning TV channels to buttons from
the one currently displayed.
Storing only the desired TV
channels
You can assign up to 12 channels (6 each for
TV1 and TV2) to the number buttons in the order
of your choice.
1
Select "TV" (see "Watching the TV" on
page 28).
2
Press either side of (SEEK) to tune in
the TV channel you want to assign to
each number button.
3
Press and hold the desired number
button ((1) to (6)) until you hear a
small beep.
The number button indication and "MEM"
appear in the display.
Note
If you try to assign another channel to the same
number button, the previously assigned channel will
be erased.