Attaching the main display window
panel
Place the main display window on the front side
of the unit as illustrated, then lightly push the
front panel into position until it clicks.
Press (SOURCE) (or insert a disc) to operate the
unit.
Note
Do not put anything on the inner surface of the main
display window.
Setting the clock
The clock uses a 12-hour digital indication.
Example: To set the clock to 10:08
1
Press (MENU), then press M or m (the
either (+/–) side of (DISC)) repeatedly
until "Clock" appears.
1 Press (ENTER).
The hour indication flashes.
2 Press M or m to set the hour.
3 Press , (the (+) side of (SEEK)).
The minute indication flashes.
4 Press M or m to set the minute.
2
Press (ENTER).
The clock starts. After the clock setting is
completed, the display returns to normal play
mode.
Tip
When D.Info mode is set to on, the time is always
displayed (page 26).
9