Setting The Clock Automatically; Other Functions; Using The Rotary Commander - Sony CDX-4180R Manual De Instrucciones

Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
Press (SHIFT), then press (2) (SET UP)
repeatedly until "CT" appears.
ET
SETUP
2
Press (4) (n) repeatedly until "CT-ON"
appears.
The clock is set.
ET
CT
SETUP
3
Press (SHIFT) to return to the normal
display.
EN
To cancel the CT function
Select "CT-OFF" in step 2 above.
Notes
• The CT function may not work even though an
RDS station is being received.
• There might be a difference between the time
set by the CT function and the actual time.
14
CTOFF
CTON

Other Functions

You can connect an optional rotary
commander (RM-X4S) with this unit.
Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons (the SOURCE
and MODE buttons)
(SOURCE)
Each time you press (SOURCE), the
source changes as follows:
TUNER ˜ CD
Pressing (MODE) changes the operation
in the following ways;
Tuner: FM1 n FM2 n MW n LW
Tip
When the POWER SELECT switch is set to position
B, you can turn on this unit by pressing (SOURCE)
on the rotary commander.
(MODE)