Sony SNC-EMX30 Guia Del Usuario página 82

Network camera
Setting up VCA
Several VCA configurations are available.
–
–
–
–
–
–
Silent VCA
In this configuration, metadata is created to facilitate searches of recordings, however, no
alarm is triggered.
4
No parameters can be changed for this selection.
Profile # 1/ Profile # 2
Two profiles can be set up with different VCA configurations
1.
2.
To rename a profile:
1.
2.
The current alarm status is displayed for information purposes.
Scenario
Scenarios are applications with pre-defined settings that are adapted to specific use cases. All
relevant settings, from tasks to metadata, are set automatically by the system.
The following scenarios are available:
–
–
–
–
–
Notice!
A camera calibration is required for all scenarios.
Using the scenarios will reset the VCA configuration to the scenario defaults.
All values (Metadata Generation and Tasks) can be edited after activating the scenario
defaults.
Delete tasks that do not fit your use cases.
Analysis type
Select the required analysis algorithm. Motion+ offers a motion detector and essential
recognition of tampering.
Sony Corporation
Off
Silent VCA
Profile #1
Profile #2
Scheduled
Event triggered
In the VCA configuration drop-down list, select Silent VCA.
In the VCA configuration drop-down list, select profile 1 or 2 and enter the required
settings.
If necessary, click Default to return all settings to default values.
To rename the file, click the icon to the right of the list field and enter the new profile
name in the field.
Click the icon again. The new profile name is saved.
Intrusion (one field)
Intrusion (two fields)
People counting
Traffic incidents
Traffic wrong way
User manual
Configuration | en 83
2019-07 | V01 | DOC