Descargar Imprimir esta página

Fein WPO10-25E Manual De Instrucciones página 17

Ocultar thumbs Ver también para WPO10-25E:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 36
3 41 01 113 06 0.book Seite 17 Dienstag, 8. Dezember 2009 7:51 07
Original Instructions for Angle Polisher.
Symbols, abbreviations and terms used.
Symbol, character
Explanation
General prohibition sign. This action is forbidden!
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
An exposed surface is very hot if touched and therefore dangerous.
Additional information.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Confirms the conformity of the power tool with the directives of the European Community.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with double or reinforced insulation
Ø
Diameter of a round part
Ø
=Max. application tool diameter
D
M=Thread for clamping flange
M
l=Length of mounting thread
l
Weight according to EPTA-Procedure 01/2003
Low speed
High speed
en
17

Publicidad

loading

Este manual también es adecuado para:

Wpo14-25eWpo14-15e7 221 637 221 497 221 48