Clock Operation - Tokai TCP-120K-N Manual De Instrucciones

EN
IMPORTANT!
It is recommended not to leave a mobile phone near the unit in order to avoid electromagnetic
interference in the speakers.
DC POWER SUPPLY
DC 5V 400MA external adaptor (not supplied) could be used for this model also. Plug the adaptor to the DC
5V hole (9), then the unit will be workable.

2.CLOCK OPERATION

1) Time can be set during OFF mode. Press TIME(3) for 2 seconds – the LCD digits are flashing ;
Then into time setting, press HOUR(2) and/or MINUTE (1) keys to set hour and minute, then press
TIME key once settings are finished. Or after 10 seconds, it will exit setup automatically
2) Under time display situation, short press TIME key, will switch the displayed hour format
between 12-hour system & 24-hour system.
-9-