Tokai LAR-380 B Manual De Instrucciones página 14

Connecting it to Portable MP3 Player
RESET
SD card slot
20,21. USB PORT / SD MEMORY CARD
The device is equipped with a USB interface and a memory card reader for SD cards. MP3 or WMA files stored
on these media can be played.
1. Plug your USB storage medium into the USB port.
2. If you use a memory card, insert it into the memory card reader.
3. The player automatically switches to the input used and starts playback.
4. See the section on operations common for audio files on how to control USB or memory card playback.
Note:
• Due to the great variety of devices with USB and SD card interfaces that sometimes have manufacturer-
specific functions, we cannot guarantee that all media will be recognized and that all operational functions
will be available with this device.
• You cannot operate USB hard drives on the device.
22. FRONT AUX IN
Convenient easy to use front "AUX IN" input jack, allows easy connection of Portable Media and digital MP3
Players.
HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
The microphone unit must be connected to the device in order to use the Bluetooth functions. In addition a mobile
phone is required that supports the Bluetooth data transmission.
Connecting the telephone to the device
• Activate the Bluetooth function on your mobile phone and conduct a search for Bluetooth devices. After a suc-
cessful search the entry CarBT appears for the device in the display of the mobile phone.
• Select this entry for the connection and for the subsequent password request enter the password 1234 for the
device. You may possibly have to confirm the connection structure once more.
After a successful coupling CONN OK appears briefly in the device's display.
Call accept/end
With an incoming call you hear the call signal via your mobile phone, whilst in the device's display is shown the
call number.
• You accept an incoming call by the "
• You end the call by pressing the "
Rejecting a call
• With an incoming call press the "
To call
• The device and the mobile phone must be connected.
• Dial the telephone number that you want to call from your mobile phone.
• The driver can use the device as hands-free kit.
Redial
• Hold down the "
• If previously no call number was selected via the number buttons on the device the last selected mobile phone
call number is dialled.
• If previously a call number was selected via the number buttons on the device this call number is dialled.
Caller lists
• Press and hold [SEL] button to select Call list mode.
• Press the BAND(ENTER) button. IN CALL: Shows the last 20 incoming calls.
• Press the BAND(ENTER) button again. OUT CALL: Shows the last 20 outgoing calls.
Note:
• The Call List feature will be activated once the mobile phone is connected with the car radio via Bluetooth.
AUX
USB
AUX IN
USB port
" button on the device.
" button on the device.
" button on the device to reject the call.
" button on the device for approx. 2 seconds.
EN-6