Telephone Book - Tokai LAR-380 B Manual De Instrucciones

Telephone book:

You can transfer up to 20 contacts (Telephone book entries) from the connected mobile phone to the device and
thus dial and call the contact from the device.
Notice:
• You cannot transfer via Bluetooth your contacts from your connected mobile to your car radio with APPLE ®
phones.
• Details for the transference of the contact via Bluetooth can be obtained from the operating instructions of your
mobile phone.
• Each transferred contact is filed in the memory slot PB01. The contacts that have already been transferred are
auto matically filed one memory slot further (PB02, etc).
• Press and hold [SEL] button to select Call list mode. "Call list" shows on LCD. Rotate the volume knob to select
"PH BOOK". Press [BAND]ENTER button to confirmed.
• Rotate the Volume knob to appears the name and number (PB01-PB20).
• Press the " " button on the device to select the dialled call number.
Deleting the caller lists and telephone book entries
When the mobile phone's bluetooth was connected with device, press [MODE] button repeatedly to select "BT
mode". Press and hold the "
nection to the mobile phone is severed and all telephone book entries and caller lists on the device are deleted.
Audio streaming (A2DP)
The device uses the A2DP profile (Advanced Audio Distribution Profile) and therefore can playback your mobile
phone's audio data.
• Select an audio file from your mobile phone and start the playback.
In the device's display appears the entry A2DP and the audio data will be played back via the speakers connected
to the device.
NOTICE:
• On the mobile phone it may possibly be necessary to switch playback via the Bluetooth stereo headset. Consult
the operating manual of your mobile phone for more information.
• With a few mobile phones the device does not automatically switch to the A2DP mode. In this case you switch
to the A2DP mode by pressing the MODE button several times until the notice BT MUSIC or A2DP appears in
the display.
AVRCP (Audio Video Remote Control Profile)
The device uses the AVRCP profile thus facilitating the control of audio devices.
• With the Preset 1(12) button on the device you can stop and/or restart the playback of audio files on the mobile
phone.
• With the buttons
24. RESET
Reset button (24) is placed on the housing.
The reset button is to be activated for the following reason:
• Initial installation of the unit when all wiring is completed.
• All the function button do not operate.
• Error symbol on the display.
" button on the device until RESET appears in the display. The Bluetooth con-
or on the device you can access the previous or next audio file on the mobile phone.
EN-7