Jimmy Styks Thresher Manual Del Propietário página 10

SE CTI ON 4
STANDARD PUMP
ONLY
UP
FOR
INFLATION
DOWN
FOR
DEFLATION
FOR WARRANTY INFORMATION, PARTS/ACCESSORIES, CALL 1-800-370-0745
OR CONTACT US THROUGH OUR WEB SITE, WWW.JIMMYSTYKS.COM
SUP INFLATION
1.
Attach pressure gauge to pump (STANDARD pump
only). Begin with pressure gauge dial facing the
ground and twist clockwise 180 degrees until dial
is securely fastened and facing upward.
2.
Fasten air hose to pressure gauge.
3.
Locate the air valve on tail section of the board deck
and open valve cap.
4.
Turn the colored valve pin counter-clockwise to the
"UP" position. The valve pin will prevent air from
escaping when in the "UP" position.
5.
Connect air hose to air valve and twist 90
the connection.
6.
Inflate to 12-15 psi.
7.
Disconnect air hose from valve and close valve cap.
SUP DEFLATION
1.
Open valve cap.
2.
Depress colored valve pin and turn clockwise to lock
the pin in the "DOWN" or open position.
3.
Allow air to freely escape inflatable SUP for a few
minutes.
4.
Beginning at the nose, tightly roll up Inflatable SUP to
force remaining air through the air valve.
10
to secure
o