Directions For Use; Minor Repairs - Jimmy Styks Thresher Manual Del Propietário

SE CTI ON 8
WEAR LATEX GLOVES TO AVOID
SKIN IRRITATION.
B E FOR E YOU START
Prepare the following items:
Latex Gloves (Pair)
Isopropyl Alcohol (Rubbing Alcohol)
Clean Cloth
Cement Applicator (Brush, Popsicle® stick, etc.)
Emergency Repair Kit Contents (Cement + Patches)
DIR EC TIO NS FOR USE
1.
Completely deflate paddle board.
2.
Thoroughly clean the surface around the leak and the matte side of the PVC/Polyester patch with
rubbing alcohol. Both surfaces must be free of moisture, oil and debris.
3.
Open the cement tube by breaking the tube seal using the outside of the tube cap.
4.
Apply cement carefully and evenly to both paddle board surface and matte side patch surface.
Avoid contact with skin & eyes. Avoid breathing cement vapors.
5.
Allow cement on both board and patch to dry to the touch. Once dry, reapply a very thin layer of
cement around the perimeter of the patch.
6.
Once cement on both board
and patch becomes tack-
free, apply patch to board
and firmly work out any
trapped air bubbles.
7.
Allow 8 hours for cement
to cure before inflating
paddleboard.
REPAIR KIT
CONTAINER
NEED REPLACEMENT PARTS?
Visit our replacement parts store online:
www.jimmystyks.com/parts.html or
call toll-free: 1-800-370-0745.
Q U E S T I O N S / C O M M E N T S :
1 - 8 0 0 - 3 7 0 - 0 7 4 5
17

MINOR REPAIRS

CEMENT
PVC/POLYESTER
PATCHES X 2