Jimmy Styks Thresher Manual Del Propietário página 12

SE CTI ON 5
PIN MOUNT FINS
PIN-MOUNT style fin sets includes a
center stabilizer fin and either a connected
attachment pin or seperate barrel/screw set.
We recommend removing fins after each use to
prevent damage to the fin, fin clamp and board.
FIN INSTALLATION
1.
Insert fin, front first then lower into place
until flush against bottom of fin clamp.
FOR WARRANTY INFORMATION, PARTS/ACCESSORIES, CALL 1-800-370-0745
OR CONTACT US THROUGH OUR WEB SITE, WWW.JIMMYSTYKS.COM
ATTACHMENT
PIN
FIN SCREW
AND BARREL
2.
Insert pin through the fin clamp eyelet. If
using a barrel/screw attachment, insert
screw through fin clamp eyelet and secure
by tightening the barrel. Verify the fin is
securly attached to the board and connecting
string is securely attached to the fin before
entering water.
12
STABILIZER FIN