Kit Assembly - Metra 95-8245CHG Instrucciones De Instalación

Double DIN radio provision
1. Mount the radio brackets to the
radio with the screws supplied
with the radio. (Figure A)
2. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
3. Mount the radio/bracket
assembly into the dash with
the factory hardware.
4. Attach the panel clip mounts onto
the radio housing using the
(4) #4 x 3/8" Phillips screws
supplied. (Figure B)
5. Attach the clips previously
removed from step 3 under dash
disassembly, to the panel clip
mounts on the radio housing.
6. Clip the radio housing over the
radio/bracket assembly.
7. Reassemble dash in reverse order
of disassembly.
95-8245HG

Kit Assembly

(Figure A) (Figure B)
3