How To Use A Vu Meter - Audio-Technica AT-HA5050H Manual De Instrucciones

The unit of measurement for a VU meter on this device is decibel (dB).
To check the output power, refer to "How to read levels against the range switch" and the conversion table below.
* If you use the meter until the pointer goes off the scale, it may cause failure of the meter.
When set to 0 dB
-10 dB Position 0 dB Position
16 ohms 6.25 mW 16 ohms 62.50 mW
32 ohms 3.13 mW 32 ohms 31.25 mW
64 ohms 1.56 mW 64 ohms 15.63 mW
150 ohms 0.67 mW 150 ohms
300 ohms 0.33 mW 300 ohms
600 ohms 0.17 mW 600 ohms
-10 dB 0 dB
When set to -20 dB
-30 dB Position -20 dB Position
16 ohms 0.06 mW 16 ohms
32 ohms 0.03 mW 32 ohms
64 ohms 0.02 mW 64 ohms
150 ohms 0.01 mW 150 ohms
300 ohms 0.00 mW 300 ohms
600 ohms 0.00 mW 600 ohms
-30 dB -20 dB

How to use a VU meter

3 dB Position
16 ohms 124.70 mW
32 ohms 62.35 mW
64 ohms 31.18 mW
6.67 mW 150 ohms 13.30 mW
3.33 mW 300 ohms 6.65 mW
1.67 mW 600 ohms 3.33 mW
3 dB
-17 dB Position
0.63 mW 16 ohms 1.25 mW
0.31 mW 32 ohms 0.62 mW
0.16 mW 64 ohms 0.31 mW
0.07 mW 150 ohms 0.13 mW
0.03 mW 300 ohms 0.07 mW
0.02 mW 600 ohms 0.03 mW
-17 dB
When set to -10 dB
-20 dB Position -10 dB Position
16 ohms 0.63 mW 16 ohms 6.25 mW
32 ohms 0.31 mW 32 ohms 3.13 mW
64 ohms 0.16 mW 64 ohms 1.56 mW
150 ohms 0.07 mW 150 ohms 0.67 mW
300 ohms 0.03 mW 300 ohms 0.33 mW
600 ohms 0.02 mW 600 ohms 0.17 mW
-20 dB -10 dB
When set to -30 dB
-40 dB Position -30 dB Position
16 ohms 0.01 mW 16 ohms 0.06 mW
32 ohms 0.00 mW 32 ohms 0.03 mW
64 ohms 0.00 mW 64 ohms 0.02 mW
150 ohms 0.00 mW 150 ohms 0.01 mW
300 ohms 0.00 mW 300 ohms 0.00 mW
600 ohms 0.00 mW 600 ohms 0.00 mW
-40 dB -30 dB
-7 dB Position
16 ohms 12.47 mW
32 ohms 6.24 mW
64 ohms 3.12 mW
150 ohms 1.33 mW
300 ohms 0.67 mW
600 ohms 0.33 mW
-7 dB
-27 dB Position
16 ohms 0.12 mW
32 ohms 0.06 mW
64 ohms 0.03 mW
150 ohms 0.01 mW
300 ohms 0.01 mW
600 ohms 0.00 mW
-27 dB
21