Hama 00102145 Instrucciones De Uso página 5

g Operating Instruction
Package contents:
1 x USB-to-serial converter cable
1 x Driver CD-ROM
1 x Printed quick guide
1 x Disposal instructions
Safety notes:
- Do not use the converter in extremely damp or dusty
environments.
- Do not operate this device on radiators or near heat
sources.
- This device is designed for indoor use only.
Software Installation:
Installation on Windows Vista 32 bit and 64 bit versions:
Note: Install the driver before connecting the USB-to-serial
converter to your computer.
Insert the enclosed driver CD-ROM into your drive. If the CD
menu does not start automatically, open Computer, open
your CD drive and double-click the Autorun.exe. fi le.
As soon as the CD menu appears on your screen, select
your language and the option "Driver Windows Vista 32
and 64 bit". This starts the driver installation; please follow
the program's instructions. In some cases, User Account
Control may appear and ask you whether the program is
allowed to have access to your system. Click -> "Allow".
If you now insert the USB-to-serial converter into a free
USB port, Vista will automatically recognise and install it.
After installation is complete, Windows wants to restart the
system. Click the button -> "Finish". After Vista has been
restarted, the USB-to-serial converter is ready for use.
You can verify whether the converter has been successfully
installed by checking under Start (Windows logo) ->
Control Panel -> System and Maintenance -> Device
Manager. In some circumstances, you may be asked by
User Access Control to allow this action. Click -> Continue.
The following entry must appear without a yellow
exclamation mark.
Ports (COM and LPT):
• Prolifi c USB-to-Serial Comm Port (COMx)
Note: To change the COM port settings, double click the
aforementioned entry in the Device Manager and select the
Port Settings tab.
4
Installation on Windows XP:
Note: Install the driver before connecting the USB-to-serial
converter to your computer.
Insert the enclosed driver CD-ROM into your drive. If the CD
menu does not start automatically, open My Computer, open
your CD drive and double-click the Autorun.exe. fi le.
As soon as the CD menu appears on your screen, select
your language and the option "Driver Windows XP".
This starts the driver installation; please follow the
program's instructions. If you now insert the USB-to-serial
converter into a free USB port, XP will automatically
recognise and install it. After installation is complete,
Windows should be restarted. After Windows has been
restarted, the USB-to-serial converter is ready for use.
Important instructions for Windows XP:
You can check whether the converter was installed
successfully under Start -> Control Panel -> Performance
and Maintenance -> System -> Hardware -> Device
Manager. The following entry should appear without a
yellow exclamation mark.
Ports (COM and LPT):
• Prolifi c USB-to-Serial Comm Port (COMX)
Note: To change the COM port settings, double click the
aforementioned entry in the Device Manager and select the
Port Settings tab.
Installation on Windows XP x64 Edition:
Insert the enclosed driver CD-ROM into your drive. If the
Hama installation menu is started, exit it by clicking "Exit/
Beenden/Terminer". Now insert the USB-to-serial conver-
ter into a free USB port on your computer. The Hardware
Update Wizard appears and asks "Can Windows connect
to Windows Update to search for software?". Select "No,
not this time" and click the button -> Next. The Hardware
Update Wizard recognises the converter as USB-Serial
Controller and asks "What do you want the wizzard to do?".
Select the option "Install from a list or specifi c location
(Advanced)" and then -> Next. In the next menu window,
select the option "Search for the best driver in these
locations" and then further down, the option "Include this
location in the search" and enter D:\Driver\Windows x64bit
(you may need to replace D with the drive letter of your CD
drive), or click Browse and choose the aforementioned
directory. -> Next.