Hama 00102145 Instrucciones De Uso página 6

If the message "The software you are installing for this
hardware: Prolifi c USB-to-Serial Bridge has not passed
Windows Logo testing to verify its compatibility with
Windows XP.", click the button -> Continue Anyway. The
necessary fi les are now copied from the CD. -> Finish.
We recommend that you restart your system after the
installation has completed before you use the USB-to-serial
converter.
Important Instructions for Windows XP x64 Edition:
You can check whether the converter was installed
successfully under Start -> Control Panel -> Performance
and Maintenance -> System -> Hardware -> Device
Manager. The following entry should appear without a
yellow exclamation mark.
Ports (COM & LPT):
• Prolifi c USB-to-Serial Bridge (COMX)
Note: To change the COM port settings, double click the
aforementioned entry in the Device Manager and select the
Port Settings tab.
Installation on Mac OS X 10.4.x or higher:
Insert the enclosed driver CD into your CD-ROM drive.
Shortly thereafter, a CD icon with the name 39703 appears
on your desktop. Double click this icon and open the direc-
tory Driver and then Mac_OS_X. In this directory, there is
a fi le named PL2303_1.2.1r2.dmg. Double click the DMG fi le
to extract the fi le. Your Mac will then open a mounted drive
with the name PL2303. In this drive, there is a fi le named
PL2303_1.2.1. Double click this fi le to start the installation
program. Now follow the instructions of the installation pro-
gram until you are requested to restart your Mac. Restart
your system and connect the USB-to-serial converted to a
free USB port on your Mac after restarting.
Note: To ensure that the driver was installed on your Mac
properly, open the Apple System Profi ler program and
choose the Hardware tab. On this tab you will fi nd the
option USB. The entry "USB-BUS -> USB-Serial Controller"
must be present there in the right window.
Support information:
Contact your dealer or Hama Product Consulting if you have
a faulty product:
Support hotline – Hama product consulting:
Tel. +49 (0) 90 91 / 502 – 115
Fax. +49 (0) 90 91 / 502 – 272
E-mail: mailto:produktberatung@hama.de
Product information and new drivers are available on the
Internet at www.hama.com.
5